|
The TT100 - a 100-watt combo, featuring a completely new pre-amp. Three channels Clean, Crunch & Lead each feature independent three band EQ, volume, bright switch and reverb. The two gain channels feature a Modern Switch which gives you super smooth response whilst the Lead channel features an additional Xpand and boost switch. Xpand breathes life back into your tone at high gain. The power section features two independent footswitchable master volumes, allowing you to give yourself a boost whatever channel you are on, great for the clean lead breaks. All footswitchable features on the TT50/100 amplifiers are fully MIDI switchable and each amp is equipped with MIDI in, MIDI thru & MIDI out 7 pin connections which support phantom power. The onboard MIDI can be used to switch external MIDI devices via the dedicated FS6 footswitch.
| Power RMS | 100 Watts | | Inputs | Single Jack | | Channels | 3 | | Equalisation | Independent Bass, Middle & Treble for each channel | | Master Presence Control | Yes | | Bright Switch | 3: 1 per channel | | Xpand Switch | Yes (on channel 3) | | Boost Switch | Yes (on channel 3) | | Modern Switch | Yes (on channel 3) | | Switchable Damping | Yes | | Twin Footswitchable Master Volumes | Yes | | Preamp Valves | Premium ECC83 | | Output Valves | Premium EL34 | | Class | A/B | | Reverb | Yes- With independent levels on each channel plus global master level | | Line Out | Yes | | Record Out | Yes | | Footswitch | FS6 (Included) | | Speaker connections | Jack | | FX Loop(s) | Yes (with mix control- 100% Dry to 100% Wet) | | MIDI IN / OUT / THRU | Yes- supports phantom power | | Impedance | Minimum 4 ohms | | Drivers | 2 x12" Celestion G12 Century Vintage Neodymium | | Weight | 25 Kg | | Dimensions (mm) | 680 * 562 * 325 | | Master volume | Yes - 2 (foot and MIDI switchable) |
|
